To strengthen safety and gain comfort, the trend is to motorize gates. Thanks to technological advances, there are now different remote controls that automate access. Among the diverse range of beeps for gates, we find the universal remote control. It differs from classic models by its practicality and the great comfort it offers. Here is the gist of the information about the universal remote control, including how it works, its advantages, and the criteria for choosing it.

How does a universal gate remote control work?

The operation of a universal gate beep is based on a simple principle. Unlike conventional beeps, this device allows you to open several gates or garage doors. It is a technology that lightens the handling of the automation of a house. With a universal remote control, it is possible to control up to four gates at once. The universal beep has programmable memory. Thanks to it, it is possible to integrate the frequencies of other remote controls and centralize their operation.

Thus, it is enough to configure the old beeps on the new one to remotely open or close the motorized accessed from a single device. However, it is impossible for one person's device to be able to control another's portals without configuration. The universal remote is not an all-in-one technology. This is a unique device, which requires a compatible frequency copy before operating.

Why opt for a universal remote control for the gate?

Many lovers of new technologies choose the universal remote control for optimal management of their home closures. In addition to its convenience, this device offers great comfort that facilitates the daily life of users.

Given their simple mechanism, traditional gate remotes can only work with a single receiver. This requires the use of one transmitter per motorization system. In a house that has four motorized doors, for example, an equivalent number of transmitters are needed to operate them. Wielding several beeps before entering or exiting can become tiring, and struggling in the long run.

To correct the difficulties, the universal remote control for gates was invented. Thanks to it, it is possible to control different openings from the same device. Most models are equipped with four buttons that allow remote control of up to four motorized openings (gate, garage door, the electric strike of a pavilion ...). With a universal remote control, it is no longer necessary to manipulate multiple beeps to control motorized inputs and outputs. Simply copy and record the frequencies of the other remote controls on the universal device and operate the automatisms using the various buttons configured.

In addition to these practical advantages, there is the security aspect. The centralization of references reduces the risk of loss, which is high when managing different remote controls. Most four-button models are equipped with a key ring that allows them to be hung on a keychain. It is easier to find the remote control to open or close a gate or door. This helps avoid the stress of losing a remote control.

In case of emergency, it saves time to open or close the accesses, because it is no longer necessary to look for the appropriate beep among the available lot. Universal gate remotes offer high-impact resistance. Some manufacturers use rubber to design the shell of the device to limit the risk of damage to the equipment.

How to choose a universal remote control?

There are different models of universal remote controls for gates on the market. To find the beep compatible with the automatisms of a house, it is necessary to take into account some important criteria, namely:

the coding system,
the brand,
frequency,
Usage.

The brand is a criterion not to be neglected to make an appropriate choice. The motorization system of a closure contains accessories that come from the same manufacturer. The receiver and transmitter are necessary for the same brand. This is why it is necessary to choose a beep of the same brand as that of the receiver. Some manufacturers offer beep models that can work on motorization from another brand. It is necessary to check that the future remote control appears in the list of brands or references provided by the engine manufacturer.

There are different remote control frequencies on the market, the best known of which are the frequency 433.92 MHz and the MHz frequency 868.35. Each accessory carries a radio frequency that characterizes it. This must be compatible with the receiver of the motorized closure for the system to work. It must be checked that the universal remote control has an identical frequency to that of the old zip. To do this, simply consult the product sheet of the future beep and compare the inscriptions with those of the old device.

Choose a remote control that has a code compatible with the receiver. There are two types of code that work differently: rotating code and fixed code. Each system works with a specific receiver that understands its language. The rotating code means that the issuer changes the code each time it is used. On the other hand, fixed refers to a receiver that uses the same code each time. In the event of an encoding system incompatible with the receiver, it will not be possible to configure the new remote control.

The choice of beep requires considering the use you want to make of it. A universal gate remote control model can have two to four keys. It is necessary to choose a transmitter that has a number of keys in accordance with the number of motorizations to integrate. For example, you need a universal two-button remote control if you want to configure two automatons.

Are universal remotes really compatible with all gates?

The universal remote control for the gate or garage is an accessory that facilitates the daily life of many homes. It allows you to switch from several beeps to one for more convenient use. Nevertheless, it is not a miracle solution, an all-in-one accessory. There is no one remote control that is compatible with all types of gates.

The term "universal" refers to the receiver's ability to receive other frequencies. Similarly, there is no beep on which you can configure an indefinite number of automation. Each type of motorization has specificities in terms of frequency and code. On the other hand, there are models of remote controls that are compatible with several automation of different brands.

Setting up a universal remote

For the universal remote control to work, it is essential to perform the configuration. Synchronizing a universal beep with a classic device is a simple task that requires no special talent. Simply follow the various indications mentioned in the programming instructions and take into account the light signals of the transmitters.

To set up a universal remote control for the gate, you must first reset the old beep. To do this, it is necessary to press simultaneously and for ten seconds on the two keys with which it is equipped. Hold until a blue light appears. Flashing means that the remote control has been reset to zero.

The new device must be configured button by button. Continuously press the first button on the universal remote and do the same for the old beep. If the setup is successful, the light flashes. This operation must be repeated on each button. If there is no light signal, repeat the operation. The process for setting the other keys does not change. The operation of one button on the universal remote does not depend on the others. To deprogram a universal remote control if needed, simply reset the transmitter.

The universal remote control for gates or garage doors is a technology that facilitates the use of motorization systems in a home. Its ergonomic programming and compact shape make it a useful accessory for the ideal management of different locking systems.